Valqua Products

Name : Synthetic Rubber Sheet

Descriptions : Synthetic rubbet (NBR, CR, EPDM) sheet

Name : Synthetic Rubber Sheet Gasket

Descriptions : No.2000 gasket processed into a specified flat shape

Name : Fluoro Rubber Sheet

Descriptions : Fluororubber sheet

Name : Fluoro Rubber Sheet Gasket

Descriptions : No.4000 gasket processed into a specified flat shape

Name : Silicone Rubber Sheet

Descriptions : Silicone rubbet gasket

Name : Silicone Rubber Sheet Gasket

Descriptions : No.5000 gasket processed into a specified flat shape

Name : FR Sheet

Descriptions : Laminated sheet of PTFE and synthetic rubber

Name : Horizontal U-Packing

Descriptions : Synthetic rubber gasket of horizontal U-shaped cross section. Available is a type with a spacer ring attached to the periphery.

Name : INFLATE Seal

Descriptions : Hollow gasket made of cloth-reinforced rubber or of rubber itself. The hollow part is supplied with air etc. to inflate the gasket for heigher sealing effect

Name : Compressed Non-Asbestos Sheet

Descriptions : Non-asbestos fiber mixed with heat/chemical resisting rubber binder, then rolled and vulcanized

Name : Compressed Non-Asbestos Sheet Anticorrosion Type

Descriptions : Version of No.6500 with anticorrosion treatmen

Name : Compressed Non-Asbestos Sheet

Descriptions : Non-asbestos fiber mixed with heat/chemical resisting rubber binder, then rolled and vulcanized

Name : BLACK SUPER

Descriptions : High heat and steam resistant Non-asbestos joint sheet that inhibits hardening caused by heat deteriotation, by blending highly heat resistant, special rubber binder. Made of heat resistant, artificial inorganic and carbon fibers as well as the minimum amount of organic fibers required. It has excellent sealing characteristics due to its smooth sheet surface and highly dense structure.

Name : CLEANTIGHT (basic design)

Descriptions : Spiral wound gasket using non-asbestos inorganic paper as filler material

Name : CLEANTIGHT (with outer ring)

Descriptions : Version of No.8590 with outer ring

Name : CLEANTIGHT (with inner ring)

Descriptions : Version of No.8590 with inner ring

Name : CLEANTIGHT (with inner/outer ring)

Descriptions : Version of No.8590 with inner and outer rings

Name : Striped CLEANTIGHT (basic design)

Descriptions : Spiral wound gasket with rolled VALQUAFOIL tape inside the spiral part of CLEANTIGHT.

Name : Striped CLEANTIGHT (with outer ring)

Descriptions : Version of No.8590L with outer ring

Name : Striped CLEANTIGHT (with inner ring)

Descriptions : Version of No.8590L with inner ring

Name : Striped CLEANTIGHT (with inner/outer ring)

Descriptions : Version of No.8590L with inner and outer ring

Name : BLACKTIGHT (basic design)

Descriptions : Spiral wound gasket using VALQUAFOIL tape applied as filler material

Name : BLACKTIGHT (with outer ring)

Descriptions : Version of No.6590 with outer ring

Name : BLACKTIGHT (with inner ring)

Descriptions : Version of No.6590 with inner ring

Name : BLACKTIGHT (with inner/outer ring)

Descriptions : Version of No.6590 with inner and outer ring

Name : Oil Sheet Gasket

Descriptions : Sheet gasket made of vegetable fiber and oil-resisting rubber

Name : Oil Sheet Gasket (Adhesive type)

Descriptions : Metallic separate plate with No.681 bonded to both sides

Name : Insulation Gasket Kit

Descriptions : Kit consisting of insulation gasket, insulation bolt, insulation washer, and iron washer/nut

Name : Insulation Gasket Kit

Descriptions : Kit consisting of insulation gasket, insulation bolt, insulation washer, and iron washer/nut

Name : Water Level Gage Gasket Set

Descriptions : Set of glass and gasket of multiple-port water level gage for high-temperature/pressure boiler

Name : ESLON packing

Descriptions : Rubber gasket with two concentric trapezoid projections provided on the seal surface

Name : ESLON packing

Descriptions : 2GZ ESLON packing with the glue joint convered with PTFE

Name : Sanitary Gasket

Descriptions : Gasket made of synthetic rubber (EPDM, FKM, VMQ) molded into gasket, complying with Hood Hygiene Law

Name : Synthetic Rubber O-ring

Descriptions : Synthetic rubber molded into O-ring cross section. Colored type is available. Low-friction lubricant rubber materials are also available

Name : NEW RUBBERFLON O-ring

Descriptions : N0.640 with surface modified for increased strength

Name : Fluoro Rubber O-ring

Descriptions : Fluoro rubber molded into O-ring cross section. Colored types (white, brown) are also available.

Name : NEW RUBBERFLON Fluoro Rubber O-ring

Descriptions : N0.640 with surface modified for increased strength

Name : Heat resistant fluoro rubber O-ring

Descriptions : Heat resistant fluoro rubber ring formed with O-shaped cross-section (Black)

Name : ARMOR CRYSTAL O-ring

Descriptions : Armor Crystal molded into O-ring cross section (transparent). Particle action grade

Name : FLIDO O-ring

Descriptions : Flid molded into O-ring cross section (black). Standard popular grade

Name : FLID ARMOR O-ring

Descriptions : Flid Armod molded into O-ring cross section (black). Special low-friction grade

Name : SPOQ ARMOR O-ring

Descriptions : Spoq Armor molded into O-ring cross section (white). Anti-plasma grade

Name : HYREC ARMOR O-ring

Descriptions : HYAREC ARMOR ring formed with O-shaped cross-section (transparent amber). Plasma resistant grade.

Name : ULTIC ARMOR O-ring

Descriptions : Rings of ULTIC ARMOR ring formed with O-shaped cross-section (transparent amber). Plasma resistant grade

Name : LABE ARMOR O-ring

Descriptions : LABE ARMOR ring formed with O-shaped cross-section (blue). For O2 plasma resistant grade only.

Name : ARCURY AD O-ring

Descriptions : ARCURY AD ring formed with O-shaped cross-section (transparent amber). For acid resistance applications.

Name : ARCURY AL O-ring

Descriptions : ARCURY AL ring formed with O-shaped cross-section (black). For alkaline resistance applications

Name : Carbon Fiber Coil Packing

Descriptions : Coil packing of carbonized fabric yarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil

Name : PTFE-Coated Carbon Fiber

Descriptions : Coil packing made of carbonize fabric yarn covered with PTFE film, braided into square cross-section and finished with PTFE , special lubricant and lubricating oil after treatment with PTFE dispersion.

Name : Carbon Fiber Coil Packing

Descriptions : Coil packing of carbonized fabric yarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil

Name : Carbon Fiber Coil Packing

Descriptions : Coil packing of carbonized fabric yarn, processed with PTFE dispersion and lubricating oil, then braided into square cross section and finished with PTFE, fine graphite and lubricating oil

Name : Mechanical Seal

Descriptions : Mechanical seal rotating parts of pumps and other industrial equipment. The products are available in two types (E and R), which differ each other in seat ring bonding method is different, but are identical in rotary unit. E series : seat-ring tightening construction for pumps R series : set-ring floating construction, for general machinery

Name : Bellows Seal

Descriptions : Mechanical seal incorporating dynamic bellows. Available are rotary type and static type.

Name : Diaphragm Seal

Descriptions : Mechanical seal employing diaphragm to cope with a wide rang of equipment installation tolerance. Available are two types : for fluid and for powder

Name : Sealing Paste

Descriptions : Light brown paste, containing nondrying oil adhesive, inorganic filler, and small quantity of solvent compounded

Name : NEW VALFLON Paste

Descriptions : Fluororesin powder that is water-dispresed using surfactant

Name : Gasket Paste (No.5, No.5M)

Descriptions : Black paste, containing graphite corpuscle compounded with oil-soluble adhesive. White paste containing copuscle (No.5M) is also available.

Name : Gasket Paste (No.6, No.6M)

Descriptions : Black paste, containing graphite corpuscle compounded with water-soluble adhesive. White paste containing copuscle (No.6M) is also available.

Name : Gasket Cutter (Form AI)

Descriptions : Kit to cut gasket material sheets

Name : Packing Tool

Descriptions : Kit consisting of various tools to pull out and insert gland packing

Name : LEAKMIL

Descriptions : Leakage detecting liquid conatined in a pressurized spray can

Name : VALFLON Lined Pipe

Descriptions : PTFE or PFA tube is inserted into steel pipe (STPG, SGP, SUS) and its both ends are flared outward

Name : VALFLON Lined Pipe (90 Elbow 45 Elbow)

Descriptions : PTFE or PFA tube is inserted into elbow pipe and its both ends are flared outward. Or steel pipe elbow is lined directly with PTFE

Name : VALFLON Lined Pipe (Tee)

Descriptions : Tee pipe lined with PTFE or PFA

Name : VALFLON Lined Pipe (Reducing Tee)

Descriptions : Reducing tee pipe lined with PTFE Reducing tee pipe lined with PFA

Name : VALFLON Lined Pipe (Cross)

Descriptions : Cross pipe lined with PTFE

Name : VALFLON Lined Pipe (Instrument Tee)

Descriptions : Steel pipe lined with PFA

Name : VAFLON Molded Vessel (PTFE)

Descriptions : Integrally molded PTFE vessel

Name : VAFLON Molded Overflow Vessel (PTFE)

Descriptions : Integrally molded PTFE overflow vessel

Name : VAFLON Welding (Vessel)(Overflow Vessel)

Descriptions : Square vessel and overflow vessel, made of PTFE sheets, cut and assembled by welding

Name : VAFLON Molded Vessel (PFA)

Descriptions : Integrally molded PFA vessel

Name : VAFLON Molded Overflow Vessel (PFA)

Descriptions : Integrally molded PFA overflow vessel

Name : VAFLON Molded Bottle

Descriptions : PFA molded bottle with outer shell

Name : VAFLON PFA Sheet Lined Vessel

Descriptions : Stainless stell or carbon steel vessel, internally lined with PFA glass back sheet, (FRP vessel is also available)

Name : VAFLON PTFE Sheet Lined Vessel

Descriptions : Stainless or steel vessel, internally lined with PTFE sheet. (FRP vessel is also available)

Name : VALFLON (PFA) Lined Ball Valve

Descriptions : Ball velve, with all liquid-contact parts lined with PFA. Cost-efficient venturi type (PF2R), utilizing the superior performance of PF2, is also available

Name : VALFLON Lined Check Valve (Spring Type)

Descriptions : Check valve, with the liquid-contact parts lined with PTFE or PFA. Can be installed on either horizontal or vertical piping

Name : HS Type Cylinder Valve HS2 HS3

Descriptions : Compact and light-weight valve, with operating air cylinder integrated with the same valve body. Small air consumption and long-term stable sealing performance

Name : Flector NE Flector

Descriptions : Expansion joint, made of various kinds of cloth (reinforced) lined with synthetic rubber on both sides, then shaped into designated form. Connection may be angle flange type, flare type, band binding type, etc.

Name : Penetration Rubber Boots

Descriptions : Nylon cloth, lined with chloroprene rubber, EPDM rubber or silicone rubber on both sides, then shaped into designated form. Fastener connection. Band binding for connecting a mating component.

Name : JYABARA

Descriptions : Bellows, made up of various types of material processed into a designated form and provided with inner and outer rings

Name : Dynamic Bellows

Descriptions : Metal welded bellows consisting of sheet metals molded into a ring of S or Y-shaped cross-section and welded at the inside and outside diameters.

Name : Dynamic Bellows (V Series)

Descriptions : Standard metal welded bellows const of desired number of blocks with a free length of 10 mm to ensure ease of use depending on the required amount of expansion

Name : Dynamic Bellows (M Series)

Descriptions : Metal welded bellows that have been developed using structural analysis technology and offer a long service lifes low cost.

Name : Dynamic Bellows Pump

Descriptions : Pneumatic carrier pump using dynamic bellows. The bellows construction excha minglement of oil or carbon and ensure supply of pure gas without altering gas properties.

Name : VALFLON Bearing

Descriptions : Bearing made of filled PTFE, molded designated shape. Available are fille materials to be selected for application

Name : VALFLON Tape Liner

Descriptions : Tape made of filled PTFE, molded into shape

Name : Flake Graphite

Descriptions : Scale-shaped selected pure graphite

Name : Unon S

Descriptions : Spray type dry lubricant, made of PTFE fine particles mixed with a small quan of binder

Name : Unon N

Descriptions : Lubricant applicable with brushing, made of PTFE fine particles mixed with a small quantity of binder

Name : Unon P

Descriptions : Powder lubricant, made of pulverized f PTFE powder. Available are P-300 and P 310 depending particle size distribution

Name : Non Asbestos Clutch Facing VS80F)

Descriptions : Glass fiber base, filled with heat-resisting resin, rubber, and friction improving agen then hot formed

Name : Non Asbestos Clutch Facing(VS60)

Descriptions : Glass fiber base. filled with resin, rubber friction improving agent, etc.. then hot formed

Name : Non-Asbestos Friction Washer (NAH44)

Descriptions : Organic fiber, resin and rubber, with friction improving agent compounded, then hot formed and punched out

Name : Non-Asbestos Friction Washer (NAH67A)

Descriptions : NAH44 base, impregnated with solid lubricant to stabilize middle to high micro- level frictional coefficient

Name : Non-Asbestos Friction Washer (NAH85)

Descriptions : N4H67A base, filled with inorganic fiber to stabilize frictional coefficient under high load

Name : Non-Asbestos Friction Washer (NAH47)

Descriptions : Washer with stabilized middle to high micro-level frictional coefficient to improve abrasion resistance

Name : VALFLON Skived Tape

Descriptions : Tape made of formed PTFE material Superior in heat resistance, weathering stability, chemical resistance, electrical characteristics, less adhesive ness, and frictional performance.

Name : VALFLON Adhesive Tape

Descriptions : Version of No.7900 with adhesive agent applied to one side

Name : VALFLON Both Side Cementable Tape

Descriptions : Version of No.7900 processed so that both sides can be bonded

Name : VALFLON One Side Cementable Tape

Descriptions : Version of No.7900 processed so that one side can be bonded

Name : VALFLON High Strength Tape

Descriptions : Version of No.7900 with improved tensile strength and electrical insulation properties

Name : VALFLON High Strength Adhesive Tape

Descriptions : Version of No.7900-S with adhesive agent applied to one side

Name : VALFLON Both Side Cementable High Strength Tape

Descriptions : Version of No.7900-S processed so that both sides can be bonded

Name : VALFLON One Side Cementable High Strength Tape

Descriptions : Version of No.7900-S processed so that onesides can be bonded

Name : VAFLON Unsintered Tape

Descriptions : PTFE rolled as unsintered

Name : VALFLON Impregnated Glass Fiber Fabric

Descriptions : Glass fabric cloth base impregnated with PTFE and sintered. Superior in mechanica strength and low adhesiveness

Name : VALFLON Impregnated Glass Fiber Fabric (one side cementable)

Descriptions : Version of No.7920 processed so that one side can be bonded

Name : VALFLON Impregnated Glass Fiber Fabric (both side cementable)

Descriptions : Version of No.7920 processed so that both side can be bonded

Name : VALFLON Impregnated Glass Fiber Fabric Adhesice Tape

Descriptions : Version of No.7920, with one side processed and coated with adhesive agent

Name : VALFLON Spaghetti Tube

Descriptions : PTFE cube. Colored type is also available

Name : VALFLON PFA Tube

Descriptions : PFA tube with superior transparency, which allows the inside content to be identified

Name : VALFLON Thermo Shrinkable Tube

Descriptions : PTFE, PFA, and FEP thermo shrinkable tubes

Name : VALFLON PFA Inside Cementable Thin Wall Tube

Descriptions : PFA thin-wall tube, with the inside chemically processed for improved adhes Liquid-ammonia treatment offers improved heat resistance, durability, and adhesivenes Electro-conductive type is also available.

Name : VALFLON PFA Tube with Inner Surface Treated with Liquid Ammonia and Relaxed Folds

Descriptions : Thin wall PFA tube with chemically treated inner surface to provide adhesivity. The tube is folded softly and folds are relaxed.

Name : VALFLON Semi-rigid Coaxial Cable

Descriptions : PTFE used for insulation and metal seamless pipe for outside conductor, which gives almost theoretical shielding effect and precise characteristic impedance, incomparable with other cables

Name : VALFEON Semi-rigid Coaxial Cable with Connectors

Descriptions : Above cable provided with connectors and subjected to bending

Name : VALFLON Semi-Flexible Co-Axial Cable

Descriptions : It has similar transmission characteristics as the semi-rigid cable, but it is very convenient to use since there is no need to work it into a cable with desired configuration and size using tooling and jigs.

Name : VALFLON Semi-Flexible Co-Axial Cable with Connector

Descriptions : Same as 7048 except that a connector is attached.

Name : VALFLON Low-Loss Semi-Rigid Co-Axial Cable

Descriptions : It has a lower transmission loss than the semi-semi-rigid co-axial cable and is suitable for use at a higher frequency.

Name : VALFLON Low-Loss Semi-Rigid Co-Axial Cable with Connector

Descriptions : Same as 7049 except that a connector is attached and bent.

Name : VALFLON Sheet

Descriptions : PTFE sheet. Filler mixed version and CTFE (trifluoride) version are also available on request.

Name : VALFLON Block and Sleeve

Descriptions : PTFE column. Filler-mixed versions are also available.

Name : VALFLON Rod

Descriptions : PTFE rod

Name : VALFLON Rod

Descriptions : PTFE small-diameter rod

Name : VALFLON PFA Molded Products

Descriptions : PFA injection molded product

Name : VALFLON PFA Bolt and Nut

Descriptions : PFA bolt and nut

Name : VALFLON Barcode Card

Descriptions : PFA card for barcode identification

Name : PP General Molded Products

Descriptions : Polypropylene injection molded product

Name : PP Box

Descriptions : Polypropylene injection molded box

Name : PP Carrier

Descriptions : Wafer cassette, polypropylene injection molded

Name : Engineering Plastic Molded Products

Descriptions : High-functionality plastics such as P PEEK, PEI, and Econole, molded in a specified shape.

Name : TOUGHRETHANE Hydrant Packing

Descriptions : Thermo-plastic polyurethane, molded imo designated shape and size.

Name : TOUGHRETHANE Tube Hose

Descriptions : Thermo-plastic polyurethane, molded into tube or hose shape. Twin-spectacle tube and irregular multiple tube are also available

Name : Valve Sheet

Descriptions : Thermo-plastic polyurethane, molded into designated shape and size. Superior in abrasion resistance.

Name : Wiper

Descriptions : Thermo-plastic polyurethane, molded im designated shape and size. Superior in abrasion-resistance and tearing strength.

Name : Roller

Descriptions : Thermo-plastic polyurethane, molded into roller shape. Metal-reinforced type is also available. Superior in abrasion resistance

Name : TOUGHRETHANE Rope

Descriptions : Thermo-plastic polyurethane, molded into rope shape

Name : TOUGHRETHANE PICA-Rope PICA-Tube

Descriptions : Transparent colored tube and rope with fluorescent pigment. Available are in three cross-section types: circular, rhombic and star

Name : TOUGHRETHANE Casing Grip

Descriptions : Thermo-plastic polyurethane, molded into grip shape.

Name : TOUGHRETHANE Film Sheet

Descriptions : Film or sheet of thermo-plastic polyurethane.

Name : TOUGHRETHANE Laminated Film Sheet Products (Substrated)

Descriptions : No.E9900 base, laminated to various substrates

Name : TOUGHRETHANE Film Sheet Products

Descriptions : Thermo-plastic polyurethane sheet, processed by printing, punching, vacuum forming, high- frequency welding, etc. Superior in adhesion

Name : TOUGHRETHANE Single Ball

Descriptions : Urethane ball, molded from tough thermo- plastic polyurethane into designated shape

Name : Rectangle Gate Valve

Descriptions : Gate valve equipped with a single action seal mechanism that can cope with back pressure.

Name : Dynamic Bellows Cylinder

Descriptions : Rod seal cylinder with a drive seal made of Dynamic Bellows M Series that excels in cleanliness, corrosion resistance and durability.

Name : Slide Shaft

Descriptions : Feeder using magnet coupling technology The driving mechanism may be selected depending on the application: manual. motor or air cylinder (air pressure).

Name : Clean Screw Bolt

Descriptions : Hexagon socket head screw bolt made of JIS B 1176 compliant stainless steel (steel grade: A2) that is lapped by a special polishing process. It has an air bleeding hole, releases less gas and eliminates Surface roughness also eliminates dragging. Nuts, spring washers and flat washers are also available for clean room applications.

Name : Bellows Type Vacuum Transfer Mechanism Bellows Type Elevating Mechanism

Descriptions : Unit with a driving shaft of Dynamic Bellows used to transfer a sample inside a chamber horizontally or vertically under a completely sealed state

Name : Compact Linear Feeder

Descriptions : Used to transfer or position a sample in a chamber of a relatively small experimental unit or analytical instrument.

Name : Compact Rotary Feeder

Descriptions : Device to transfer rotary motion into vacuum equipment using angular displacement and displacement perpendicular to the axis.

Name : VALQUATEX C (yarn)

Descriptions : Yarn made of flame resisting carbonized fiber

Name : VALQUATEX C (cloth)

Descriptions : Cloth made of flame resisting carbonized fiber

Name : VALQUATEX C (cloth for spatter)

Descriptions : VALQUATEX filled with inorganic filler

Name : VALQUATEX C (ribbon)

Descriptions : Rope made of heat resisting glass braided to square cross section. Circular cross section is also available.

Name : VALQUATEX G (cloth)

Descriptions : Cloth made of heat resisting glass

Name : VALQUATEX G (cloth with wire)

Descriptions : Cloth made of heat resisting glass with wire

Name : VALQUATEX G (ribbon)

Descriptions : Ribbon made of heat resisting glass

Name : VALQUATEX G (one-side aluminus ribbon)

Descriptions : Ribbon made of heat-resisting glass fiber, with aluminum foil on one side

Name : VALQUATEX G (one-side adhesive ribbon)

Descriptions : Ribbon made of heat-resisting glass fiber with adhesive on one side ribbon

Name : VALQUATEX S (yarn)

Descriptions : Yarn made of ceramic fiber

Name : VALQUATEX S (Braided rope)

Descriptions : Braided rope made of ceramic fiber.

Name : VALQUATEX S (rope with glass fiber)

Descriptions : Circular-cross-section rope, with braided ceramic fiber core and glass-fiber integument

Name : VALQUATEX S (cloth)

Descriptions : Cloth made of ceramic fiber

Name : VALQUATEX S (cloth treated to resist smoke)

Descriptions : Valquatex S cloth processed to prevent smoke

Name : VALQUATEX S (ribbon)

Descriptions : Ribbon made of ceramic fiber

Name : VALQUATEX S (ribbon treated to resist smoke)

Descriptions : Valquatex S cloth processed to prevent smoking

Name : VALQUATEX K (one-side adhesive ribbon)

Descriptions : Ribbon made of high-purity silica fiber. with adhesive applied to one side